Help:Easy Timeline syntax

The EasyTimeline feature produces an embedded image from wikitext. The image can be a one-dimensional diagram (horizontally or vertically), or a two-dimensional one. The name "EasyTimeline" refers to the possibility to apply the feature with a time scale horizontally or vertically, possibly with another parameter in the other direction, but there are also various other possiblities.

Introduction

Graphical timelines can be produced by providing a script between special tags:
<timeline>
script
</timeline>

EasyTimeline will then be invoked to render a PNG image and (optionally) a clickable map.

Disclaimer: Even when EasyTimeline is designed for ease of use, a complicated graphical timeline is a non-trivial affair. A simple timeline may take half an hour to compose (or even less, when a suitable example is taken as a basis). Large timelines may take a few hours for composition and fine-tuning. However, adding to or correcting a timeline, no matter how complex, should be a relatively straightforward affair, even for contributors who have no expert knowledge of the syntax described here.

Feel free to ask the author of EasyTimeline for advice.

Available commands

The script commands define:

Overall layout: ImageSize, PlotArea, Colors, BackgroundColors, AlignBars
Interpretation and presentation of dates and periods: DateFormat, Period, ScaleMajor, ScaleMinor, TimeAxis
Events, periods and descriptive texts: PlotData, TextData
How to order, divide, and name groups of events and periods: BarData, Legend, DrawLines
Shorthands for pieces of script code that occur multiple times: Define

The following commands are mandatory: ImageSize, PlotArea, Period and TimeAxis. At least one of the following commands is required: PlotData and/or TextData. Either or both can occur multiple times. All other commands are optional.

Case: Commands and their attributes can be specified in lower, upper or mixed case. Please try to be consistent in applying case as this will further readability, e.g. use mixed case for all commands and lowercase for all attributes.

General syntax rules

A script can contain commands and comments. Each command is followed by one or more attributes.

Commands

Commands should start on the first position of a line. Some commands can be followed by multiple lines of data and/or options. These extra lines should start with at least one space or be completely empty (the latter is useful for visually grouping related data lines).

Commands have the one of the following forms, depending on the type of command:

Command = attribute(s)

DateFormat = dd/mm/yyyy

Command name = attribute(s)

Color Jp = value:red legend:Japan

Command =
  attribute(s)
  attribute(s)
  etc.

PlotData =
  fontsize:XS width:20
  bar:Japan from:start till:19/02/1945 color:JT
  bar:Japan from:19/02/1945 till:14/03/1945 color:AI

Comments

Single and multi line comments can be specified:

Text following the hash sign # will be regarded as a comment
Text between #> and <# will also be regarded as a comment. Comments can span multiple lines, when tagged this way.

Examples:

Dateformat = dd/mm/yyyy # European date format

Period = from:01/09/1939 till:02/09/1945 #> this chart will show
   the complete duration of World War II <#

Attributes

When several attributes can be specified for a certain command, they are notated as 'name:value' pairs. When several values can be specified for one attribute they have to be enclosed between parentheses.

Examples:

AlignBars = justify
Color SB = value:rgb(0.8,0,0.7) legend:Sea_Battles

Parameters vs data items

Most commands only accept attributes that are specified on the same line.

Data blocks: some commands, like BarData, PlotData, TextData, Colors expect a data block consisting of one or more data lines. Data lines should start with one or more spaces. A data block is considered complete when a line starting with a non-space is encountered (exception: empty lines are ignored, they may be used to group related data lines within a block).

Attributes in a data block can conceptually be divided into parameters and data items. Data blocks can contain parameters and data items intermingled.

Data items: in data lines attributes text, from, till and at always apply only to the line in which they occur.

Parameters: in data lines attributes like color and fontsize have different implications depending on the context. If these parameters occur on a line without data items, they set new defaults for the data lines that follow. If they appear on a line mixed with data items they apply only to that line, thus overruling a default that was previously set.

Example:

# In this example two sets of bars are drawn, in red and blue respectively,
# but in each set one bar (marking war periods) will be drawn in green.

PlotData =
  color:red fontsize:S                               # set defaults
  bar:USSR from:1919 till:1922 text:Lenin            # red bar
  bar:USSR from:1922 till:1953 text:Stalin           # red bar
  bar:USSR from:1939 till:1945 text:WWII color:green # green bar
  bar:USSR from:1953 till:1964 text:Krushchev        # red bar
   
  color:blue                                         # change default color
  bar:US from:1913 till:1921 text:Wilson             # blue bar
  bar:US from:1917 till:1918 text:WWI color:green    # green bar
  bar:US from:1921 till:1923 text:Harding            # blue bar

#> this multiline comment does not end command PlotData,
   even when the previous line does not start with a space<#

   bar:US from:1923 till:1929 text:Coolidge           # blue bar

TextData =                                           # now PlotData is considered complete
   tabs:...etc

Special characters

#, #>, <# (hash, hash+"greater than", "less than"+hash): see Comments
~ (tilde) in texts means: line break
^ (caret) in texts means: tab
_ (underscore) in texts means: space
$ (dollar sign) precedes any user defined constant

Command Reference

For each command the valid attributes are listed. Some commands and/or attributes are optional (O).

For some commands certain attributes are mutually exclusive (will be explained where applicable).

AlignBars

Bars will always be drawn at equal distances. This command specifies whether the bars should be spaced as much apart as possible, or some white space should be reserved between the left/top side of the chart and the first bar or between the last bar and the right/bottom side of the chart.

early (default): The first bar will be placed on the leftmost/topmost position of the chart ('glued' to the axis), leaving space between the last bar and right/bottom side of the chart.
late: Opposite from early: the last bar will be placed as far to the right/bottom side of the chart as possible, leaving space between the axis line (left/top side of chart) and the first bar.
justify: The first and last bars will be placed as far apart as possible, leaving no empty space on either side of the chart. When only one bar is present, justify will be interpreted as "centered".

Examples: Template:EasyTimeline Examples AlignBars

BackgroundColors

This command allows the specifiction of background colors for various parts of the chart. Any color ids specified should be defined first using Colors.

canvas (O): Specify a background color for the whole image.
bars (O): Specify a background color for all bars.

Examples:

BackgroundColors = bars:darkgrey

BackgroundColors = canvas:lightgrey bars:darkgrey

BackgroundColors = canvas:lightgrey

BarData

This is an optional command which if present determines which bars will be drawn on the chart and in which order. If it is omitted then bars will be drawn in order of their appearance in command PlotData.

For complex timelines with many bars, usage of this command is recommended:

It will ease reordering of the displayed data.
Bar names specified in PlotData can be validated against this list, thus preventing typing errors.

bar: defines the bar id. Other commands (notably PlotData) will expect this id for reference. This will also be the label to be shown along the axis, unless attribute text is present. The bar id should not contain any spaces: use underscores instead, these will be converted to spaces, as wih article titles.
text (O): When specified this specifies the text to be presented along the axis, instead of the bar id. See also rules for text input. The text may include one embedded link (see Note 1).
link (O): Specify a web link (see Note 1) (URL). The label along the axis will be shown as a blue clickable link.

Notes

Either use attribute link, or an embedded link in attribute text, not both.

Examples:

BarData =
  bar:Japan
  bar:US       text:"United States"  # refer in PlotData to bar "US" but show "United States"
  bar:China    text:[[China]]        # label China will be shown as blue clickable link to the English Wikipedia article about China

The following lines produce the same output (only reference in PlotData changes):

bar:US            text:[[United_States]]

bar:US            text:"United States" link:http://www.wikipedia.org/wiki/United_States

bar:United_States                      link:http://www.wikipedia.org/wiki/United_States

Colors

This command allows colors to be defined and coupled to an id (identification tag). Other commands will refer to colors with the id specified here. This command expects one or more color definitions, each on a separate indented line.

id: Other commands will use this id to specify text, bar or background colors.
value: Actual color definition. Color values can be either be specified as:

predefined color constant, for which 32 predefined color names are recognized (see the Ploticus color page where all these constants are defined). rgb (red,green,blue): specify 3 numbers between 0 (minimal) and 1 (maximal) hsv (hue, saturation, value): specify 3 numbers between 0 and 1 gray (value): specify a number between 0 (black) and 1 (white)

legend (O): Specifies the text that should be displayed in the legend for this color. If this attribute is omitted no entry will appear in the legend at all. See Text Input for rules.

Example:

Colors =
  id:war       value:red   legend:War Period
  id:peace     value:blue  legend:Peace Time
  id:treaty    value:rgb(0.6,0,0.6)
  id:lightgrey value:gray(0.9)
  id:darkgrey  value:gray(0.1)

DateFormat

This comand defines how dates, specified in other commands, should be interpreted.

Valid dateformats are:

dd/mm/yyyy: Dates are interpreted as day/month/year; Note: this format is only allowed for dates starting from 01/01/1800
mm/dd/yyyy: Dates are interpreted as month/day/year; Note: this format is only allowed for dates starting from 01/01/1800
yyyy: this deals with integers from -9999 to +9999

Example:

DateFormat = mm/dd/yyy

Define

This command allows definition of text constants, i.e. shorthands for pieces of script code that occur multiple times. Text constants should always start with a $ (dollar sign).

Example:

Define $broad       = width:30
Define $narrow      = width:10
Define $bardefaults = $broad fontsize:S

DrawLines

Some timelines extend over several clearly distinct periods. A line demarcating these periods may serve as a visual aid.

Lines specified here will be drawn over the whole width/length of the chart (depending on the orientation defined by TimeAxis).

at: Specify the date/year where the line should be drawn, in compliance with the specified DateFormat.
color: Specify the color in which the line should drawn.; Note: The color id specified should be defined first with command Colors.

Example:

LineData=
  at:start      color:red
  at:end        color:red
  at:07/12/1941 color:red

ImageSize (mandatory)

This command defines the overall size of the final image. Specify values in absolute measurements.

width: Width of final image: maximum is 1600 pixels
height: Height of final image: maximum is 1200 pixels

Example:

ImageSize = width:800 height:600

Legend

A legend will only be shown when this command is present. There are several ways to define the appearance and position of the legend. Some attributes are mutually exclusive (see below).

orientation (O): Specify hor[izontal] or ver[tical] (default).; Restriction: orientation = 'horizontal' and position = 'right' are mutually exclusive
position (O): Defines placement of the legend relative to the chart area. Specify top, bottom (default) or right.; Restriction: orientation = 'horizontal' and position = 'right' are mutually exclusive
columns (O): Specify 1, 2, 3 or 4. When this attribute is omitted the number of columns is determined as follows:

Orientation horizontal : Attribute columns does not apply here. All entries will be on the same line.
Orientation vertical :
- Position right : All entries will be in one column
- Position top or bottom : The number of columns depends on the number of entries to be shown:
  1-5 entries: 1 column, 6-10 entries: 2 columns, 11 or more entries: 3 columns.

Tip: you may consider omitting the following parameters at first, and only add them when defaults settings are not satisfactory.

columnwidth (O): Defines the distance between columns. You can specify an absolute distance or a relative distance (as percentage of the page width).; Restriction: this parameter is ignored when columns = 1 is defined or implied.
left (O): Defines the distance between the left side of the legend and the left side of the page. You can specify an absolute distance or a relative distance (as percentage of the page width).
top (O): Defines the distance between the top of the legend and the bottom of the page. You can specify an absolute distance or a relative distance (as percentage of the page height).

Examples:

Legend = orientation:vertical position:bottom columns:3 columnwidth:140

Legend = orientation:horizontal position:bottom

Legend = left:100 top:120 columns:3

Period (mandatory)

Defines the time period that will be displayed in the chart. Both parameters are mandatory. Specify dates in compliance with specified DateFormat.

from: Timeline starts here. The specified value can be referenced as start in commands like PlotData and TextData.
till: Time ends here. The specified value can be referenced as end in other commands.

Example:

Period = from:01/09/1939 till:02/09/1945

PlotArea (mandatory)

width: Specify value in absolute or relative measurements.
height: Specify value in absolute or relative measurements.
left: Margin between left side of image and left side of plot area. Specify value in absolute or relative measurements.
bottom: Margin between bottom of image and bottom of plot area. Specify value in absolute or relative measurements.

Examples:

PlotArea = width:640 height:420 left:160 bottom:120

PlotArea = width:80% height:70% left:20% bottom:20%

PlotData

Used to define bars (symbolizing a time period), and add text next to these bars on a specific position.

For texts which are not related to a certain period or date/year or which require extensive formatting use command TextData.

Attributes text, at, from and till always apply only to the line on which they occur. All other attributes, when not combined with one these four, act as default for the remainder of the command block or until a new default is specified, and may be overruled for a single line. See Parameters vs Data Items for more info and an example.

PlotData accepts a lot of attributes, some of which are mutually exclusive. These attributes can be grouped as follows:

Positional attributes
Bar related attributes
Text attributes
Marker attribute

Positional attributes

at

Specifies at which date/year a text should be positioned. Depending on attribute align the text either starts, ends or is centered at this position. Use date/year format as specified in DateFormat or specify start or end which refers to time frame defined by command Period.

NB: This attribute can not be combined with attributes from or till.

from

Specifies at which date/year a bar should start. Use date/year format as specified in DateFormat or specify start which refers to time frame defined by command Period.

NB: This attribute should be used in combination with attribute till and can not be combined with attribute at.

till

Specifies at which date/year a bar should end. Use date/year format as specified in DateFormat or specify end which refers to time frame defined by command Period.

NB: This attribute should be used in combination with attribute from and can not be combined with attribute at.

shift

Specifies a horizontal and vertical displacement in absolute measurements for a text. This allows:

Texts to be shifted to avoid overlaps
Placement of text beside a bar, instead of on top of it.

Examples:

PlotData=
  bar:Japan from:start      till:19/02/1945 color:JT
  bar:Japan from:19/02/1945 till:14/03/1945 color:AI
  bar:Japan from:02/09/1945 till:end        color:AO

  at:07/12/1941 shift:(0,-15) text:"<-- WW2 reaches Asia"

Bar related attributes

bar: Specifies to which bar all other attributes apply.; When command BarData has not been used, bars will be drawn in the order in which they occur in any PlotData data block. The id specified here will also be the text presented along the axis, next to the bar.; When command BarData has been used, bars will presented in the order specified there, also the bar id specified here will be validated against that list. Also the text presented along the axis will depend on the definition in BarData.
color: Specifies the color is which the bar should be drawn.; The color id specified should be defined first with command Colors.
width: Specifies the width of the bar in absolute or relative measurements.

Example:

BarData=
  id:US text:United States
  id:SB text:Sea Battles

Colors=
  id:US value:blue legend:United_States
  id:SB value:rgb(0.8,0,0.7) legend:Sea_Battles

PlotData=
  width=0.3                                                            # see note 1
  bar:SB     from:07/08/1942 till:09/02/1943 text:Guadalcanal color:SB # see note 2
  bar:US     from:start      till:end color:US                         # see note 3
  bar:Midway from:start      till:end color:US                         # see note 4
  bar:US     at:07/12/1941   text:7/12 Pearl Harbour                   # see note 5

Notes:

this line establishes a default bar width for the remainder of the data block
this line specifies a bar to be drawn and a text to placed on it at the same time
bar US will be drawn before bar SB, even when specified after it, because command BarData determines the sequence
bar Midway will be rejected because it is not declared with command BarData
the last line will not result in a bar being plotted, it merely specifies on which bar the text should be placed

Text attributes

text: Defines a text that should be plotted on or near a bar. The anchor position can be defined either explicitly with attribute at, or implicitly with attributes from and till. In the latter case the text will be positioned in the middle of the defined bar segment. See also Text Input for rules; The text may include embedded links (see Notes 1 & 2) for use in clickable maps.
textcolor (O): Defines the color of the text. The color id specified should be defined first with command Colors. When not specified color black will be assumed.
fontsize (O): Specify a point size between 6 and 30, or (preferably) one of tags XS, S (default), M, L or XL. See Font Support for more details.
align (O): Specify center (default), left or right.
link (O): Specify a web link (see Note 1) (URL) for use in clickable maps. The text will be shown as a blue clickable link.

Notes

Either use attribute link, or an embedded link in attribute text, not both.
On PNG images only one clickable link will be shown per text segment (text with line breaks (~) constitutes several segments).

Example:

PlotData=
   bar:US at:07/12/1941 align:left textcolor:black fontsize:XS text:7/12 [[Pearl Harbour]]

produces the same result as:

PlotData=
   bar:US at:07/12/1941 align:left textcolor:black fontsize:XS text:"7/12 Pearl Harbour" link:http://www.wikipedia.org/wiki/Pearl_Harbour

Marker attribute

mark: Places a marker in a bar at the specified position. Specify as mark:(symbol, color). The only value for symbol supported to date is line. The color id specified should be defined first with command Colors. When not specified color black will be assumed.

Example:

PlotData=
  bar:test width:15 color:red
  from:1900 till:2000
  at:1990 mark:(line,white)

will be shown as: <timeline> ImageSize = width:140 height:60 PlotArea = width:100 height:30 left:20 bottom:30 TimeAxis = orientation:horizontal DateFormat = yyyy Period = from:1900 till:2000 AlignBars = early ScaleMajor = unit:year increment:50 start:1900 Colors =

 id:canvas value:rgb(1,1,0.85)

BackgroundColors = canvas:canvas PlotData =

 width:15 color:red
 bar:test from:1900 till:2000
 bar:test at:1990 mark:(line,white)

</timeline>

ScaleMajor

This command divides the timeline into smaller periods, either

Graphically, through thin vertical or horizontal lines in the chart
Textually, through stubs in the time axis, below or to the left of the chart
Both graphically and textually

Note: the orientation of the lines and/or placement of the stubs depends on the orientation of the TimeAxis.

gridcolor (O): Defines the color for the grid lines. When this attribute is omitted no grid lines will be drawn.; Note: The color id specified should be defined first with command Colors.
unit (O): Specifies the unit by which the grid spacing is incremented. Specify day, month or year (default).; Note: When DateFormat yyyy is specified, only unit year is allowed.
increment (O): Specifies the numbers of units by which the grid spacing is incremented. Default is 1.
start (O): Specifies where the first grid line and/or stub should be displayed. Defaults to start of defined Period.

Examples:

ScaleMajor = gridcolor:red start:1940

ScaleMajor = gridcolor:red unit:month increment:3 start:01/09/1939

ScaleMinor

This command defines a further subdivision of the timescale. See ScaleMajor for syntax .

Example:

ScaleMajor = grid:red  unit:year  increment:1 start:01/01/1940
ScaleMinor = grid:blue unit:month increment:3 start:01/10/1939

TextData

Used to define a text block that can be positioned anywhere on the chart.

text

The actual text. See also Text Input for rules. The text may include embedded links (see Notes 1 & 2).

pos

Defines the top-left corner of the text block in absolute or relative measurements. Define as pos:(x,y).

link (O)

Specify a web link (see Note 1) (URL) for use in clickable maps. The label along the axis will be shown as a blue clickable link.

textcolor (O)

Defines the color of the text. The color id specified should be defined first using Colors. When not specified, the color is black.

fontsize (O)

Specify a point size between 6 and 30, or (preferably) one of tags XS, S (default), M, L or XL (see Font Support for more details).

tabs (O)

Defines position and alignment for tab character: ^ (caret). Specify multiple tab settings as tabs: (x¹-a¹,x²-a²,x³-a³, etc..) where

xⁿ is the horizontal displacement in absolute measurements from the left side of the text
aⁿ is the alignment for the text segment (specify center, left or right)

lineheight (O): Defines spacing between consecutive lines in absolute measurements. Specify a value up to 40 pixels or 0.4in. When not specified a default lineheight will be based on the font size currently in use.

Notes:

Either use attribute link, or an embedded link in attribute text, not both.
On PNG images only one clickable link will be shown per text segment (text with tabs (^) constitutes several segments).

Example:

TextData =
  pos:(20,67) textcolor:black fontsize:S
  tabs:(10-right,14-left,50-left,90-left,230-left)
  text:^1^1940^27/9^Germany,Italy and Japan sign [[Tripartite Pact]]
  text:^10^1944^1-22/7^Bretton Woods 44 nations establish
  text:^^^^^IMF and World Bank

will be shown as: <timeline> ImageSize = width:400 height:70 PlotArea = width:400 height:70 left:0 bottom:0 TimeAxis = orientation:vertical # dummy, required Period = from:0 till:1 # dummy, required Colors =

 id:canvas value:rgb(1,1,0.85)

BackgroundColors = canvas:canvas TextData =

 pos:(20,67) textcolor:black fontsize:S
 tabs:(10-right,14-left,50-left,90-left,230-left)
 text:^1^1940^27/9^Germany,Italy and Japan sign Tripartite Pact
 text:^10^1944^1-22/7^Bretton Woods 44 nations establish
 text:^^^^^IMF and World Bank

</timeline>

TimeAxis

Defines the orientation of the time axis, and textual representation of stubs along that axis.

format (O): Specify in which format dates should be presented along the time axis.; Currently only format yyyy (default) is supported. More formats may follow.
orientation (O): Specify hor[izontal] (default) or ver[tical].

Example:

TimeAxis = orientation:horizontal format:yyyy

Presets

At the moment two presets are available:

Preset = TimeVertical_OneBar_UnitYear
Preset = TimeHorizontal_AutoPlaceBars_UnitYear

Not clear if whether there is documentation about them.

Input rules

Scales for size and position

Absolute measures may be used for specifying sizes, positions and position shifts, measured in pixels.

Example:

PlotArea = width:800 height:600 left:50 bottom:50

Relative measures may be used for specifying sizes and positions. Specify a number between 0 and 100, immediately followed by a % (percentage) sign. For horizontal measurements the percentage is related to image width, for vertical measurements to image height.

The first coordinate is horizontal from left to right, the second is vertically upward.

Example:

PlotArea = width:80% height:80% left:10% bottom:5%

Text Input

Text input is subject to a few rules:

1 No unicode is allowed yet. See also font support.

2 When text should contain spaces, either specify these by using underscores or place the text between double quotes.

Exception: when the text attribute is the last attribute on a line, spaces are allowed (no confusion will arise where the text stops and the next attribute starts, that is—to be precise—when no colons occur in the text).

Example: (the following are all equivalent)

BarData =
  text:Japanese_mandate_since_1914 bar:Marshalls

BarData =
  text:"Japanese mandate since 1914" bar:Marshalls

BarData =
  bar:Marshalls text:Japanese mandate since 1914

3 In data lines following command TextData two characters have special meaning:

~ (tilde) means line break

^ (caret) means tab

Example showing line breaks:

TextData =
  .. text:Generated for Wikipedia~Version 1.1 - 2 Januari 2004

# will be shown as:
#
#  Generated for Wikipedia
#  Version 1.1 - 2 Januari 2004

Example showing tabs:

TextData =
  tabs:(4-right,12-right,14-left,34-left)
  text:^1^1940^27/9^Berlin Ger,It,Jap sign Tripartite Pact
  text:^10^1944^1-22/7^Bretton Woods 44 nations establish
  text:^^^^^IMF and World Bank

# will be shown as:
#
#      1    27/9 Berlin Ger,It,Jap sign Tripartite Pact
#     10  1-22/7 Bretton Woods 44 nations establish
#                                    IMF and World Bank

Clickable maps

Both output formats available in MediaWiki, i.e. PNG and SVG, can contain clickable links. Texts shown in blue, and bars, may then be clicked, to surf to another web page.

Links can be specified with commands BarData, PlotData and TextData, either with attribute link, or as embedded links, via attribute text.

Embedded links

Embedded links are links that are (part of a) displayable text, specified with attribute text. Their counterpart are explicit links (URL only) which are defined with attribute link.

Both type of links can be specified with commands BarData, PlotData and TextData and are used for clickable maps.

In embedded links, internal link style is as usual, interwiki link style does not work, external link style is as usual with single brackets, but here with a pipe instead of a space. Blank spaces and underscores in the url should be written as %20.

Examples:

  text:example [[Help:Link]] internal link

will be shown as: <timeline> ImageSize = width:380 height:25 PlotArea = width:380 height:25 left:0 bottom:0 TimeAxis = orientation:vertical # dummy, required Period = from:0 till:1 # dummy, required Colors =

 id:canvas value:rgb(1,1,0.85)

BackgroundColors = canvas:canvas TextData =

 pos:(10,10) fontsize:XL text:"example Help:Link internal link"

</timeline>

  text:[[Help:Link|Link]]

will be shown as: <timeline> ImageSize = width:380 height:25 PlotArea = width:380 height:25 left:0 bottom:0 TimeAxis = orientation:vertical # dummy, required Period = from:0 till:1 # dummy, required Colors =

 id:canvas value:rgb(1,1,0.85)

BackgroundColors = canvas:canvas TextData =

 pos:(10,10) fontsize:XL text:"Link"

</timeline>

  text:[http://en.wikipedia.org/wiki/Rembrandt|Rembrandt van Rijn] paints Night Watch

will be shown as: <timeline> ImageSize = width:380 height:25 PlotArea = width:380 height:25 left:0 bottom:0 TimeAxis = orientation:vertical # dummy, required Period = from:0 till:1 # dummy, required Colors =

 id:canvas value:rgb(1,1,0.85)

BackgroundColors = canvas:canvas TextData =

 pos:(10,10) fontsize:XL text:"van Rijn paints Night Watch"

</timeline>

Attempt to use interwiki link style:

  text:[[en:Main_Page]]

and similar with nl: and m: give:

<timeline> ImageSize = width:380 height:25 PlotArea = width:380 height:25 left:0 bottom:0 TimeAxis = orientation:vertical # dummy, required Period = from:0 till:1 # dummy, required Colors =

 id:canvas value:rgb(1,1,0.85)

BackgroundColors = canvas:canvas TextData =

 pos:(10,10) fontsize:XL text:"en:Main_Page"

</timeline>

<timeline> ImageSize = width:380 height:25 PlotArea = width:380 height:25 left:0 bottom:0 TimeAxis = orientation:vertical # dummy, required Period = from:0 till:1 # dummy, required Colors =

 id:canvas value:rgb(1,1,0.85)

BackgroundColors = canvas:canvas TextData =

 pos:(10,10) fontsize:XL text:"nl:Main_Page"

</timeline>

<timeline> ImageSize = width:380 height:25 PlotArea = width:380 height:25 left:0 bottom:0 TimeAxis = orientation:vertical # dummy, required Period = from:0 till:1 # dummy, required Colors =

 id:canvas value:rgb(1,1,0.85)

BackgroundColors = canvas:canvas TextData =

 pos:(10,10) fontsize:XL text:"m:Main_Page"

</timeline>

The third one to Meta-Wikipedia works properly, except from Meta itself, the other links work like Main_Page (internal page, the prefix is ignored) or e.g. https://en.orthodoxwiki.org/w/Main_Page (gives File not found), depending on the URL of the referring page (e.g. different for a preview page and a diff page).

Font Support

No unicode is allowed yet. No font type can be specified yet.

Five font tags are predefined which will render at slightly different sizes in PNG and SVG images to produce optimal readability for both platforms. It is advised to use these tags instead of numbers whenever possible. They are: XS=eXtra Small, S=Small (default), M=Medium, L=Large, XL=eXtra large

<timeline> ImageSize = width:130 height:90 PlotArea = width:130 height:90 left:0 bottom:0 TimeAxis = orientation:vertical #dummy Colors =

 id:gray  value:gray(0.95)

Backgroundcolors = canvas:gray Period = from:1 till:2 # dummy TextData =

 pos:(10,70) fontsize:XS text:"fontsize:XS"
 pos:(10,58) fontsize:S  text:"fontsize:S"
 pos:(10,41) fontsize:M  text:"fontsize:M"
 pos:(10,25) fontsize:L  text:"fontsize:L"
 pos:(10,7)  fontsize:XL text:"fontsize:XL"

</timeline>

This documentation is originally a wikified version of the original EasyTimeline documentation.

Help:Easy Timeline syntax

Contents

Introduction

Available commands

General syntax rules

Commands

Comments

Attributes

Parameters vs data items

Special characters

Command Reference

AlignBars

BackgroundColors

BarData

Colors

DateFormat

Define

DrawLines

ImageSize (mandatory)

Legend

Period (mandatory)

PlotArea (mandatory)

PlotData

Positional attributes

Bar related attributes

Text attributes

Marker attribute

ScaleMajor

ScaleMinor

TextData

TimeAxis

Presets

Input rules

Scales for size and position

Text Input

Clickable maps

Embedded links

Font Support

Navigation menu

Search